Liquid Roofing is the new feat in the RV roofing industry.
As a newer option for RV roofing many RV owners are not familiar with its use
and application. In this article we have shared some tips and tricks to make
sure you get most out of the product e.g., Liquid EPDM.
Start with Cleaning
Before you apply Liquid Roof you have to first clean the RV
roof to remove dirt, debris, loose materials and oil residues. A power wash is
the right way to start with. A clean RV roof will make it easier for Liquid
EPDM to adhere to the roof properly.
It must be dry
When you are done with power wash, let the RV roof to completely dry
under the sunlight. For porous material it is more critical as it can absorb
water and later on release that moisture causing bubbles and blistering after
Liquid EPDM application.
Right tools do matter
Liquid EPDM can be easily applied by using simple paintbrush
or a paint roller; however, you will need additional tools as well such as a
paddle mixer and a bucket to combine the liquid and the catalyst. Painters
tape may also be needed if you are applying Liquid EPDM to a particular area
and do not want to coat adjacent areas.
Go thin
Liquid EPDM is one coat application system for your RV
without needing a primer (in most cases). You only need a single coat in most
cases, which should be around one millimeter thick. Don’t apply a second coat
unless it absolutely needed.
Give it time
Liquid EPDM water-proofs the RV the instant it is applied,
even if it rains it is fine in most cases. However, it is advisable to choose a
clear warm sunny day for Liquid EPDM application as it takes a temperature
above 55’F degrees to cure and 24 hours to dry out completely.\
Have any question? Drop us line at 855-281-0940 or visit,https://www.liquidroofrvrepair.com/&
for some tips to get you through with liquid EPDM roofing visit,https://www.liquidroofrvrepair.com/liquid-epdm-tips-the-best-roofing-material-for-your-rv.html.
